Epson EMP-730 User Manual page 70

When the Indicators Provide No Help
Only part of the image is displayed (Large/ small)
Only part of the image is
displayed
Small
The image colors are not right
68
• Has the "Aspect Ratio " setting been selected
correctly?
Use the "Aspect Ratio" command in the "Video" menu to
set the aspect ratio to "4:3".
(p.51)
• Has the "Position" setting been adjusted correctly?
Use the "Position" command in the "Video" menu to adjust.
(p.49, 50)
• Has the correct resolution been selected?
Set the computer so that the signals that are output are
compatible with this projector. Refer to the documentation
provided with your computer for details on changing the
settings. (p.90)
• Change the resolution for the laptop computer or
computer with a LCD screen.
Change the resolution so that the image is displayed in the
whole of the projection area, or set the image signal to
external output only. (p.30)
• Has the computer been set for dual display?
If dual display has been activated in the Display Properties
of the computer's "Control Panel", the projector will only
project about half of the image on the computer screen. To
display the whole of the image on the computer screen,
turn off the dual display setting. Refer to the video driver
manual for the computer's monitor for further details.
• Has the image brightness been adjusted correctly?
"Video" - "Brightness" (p.49, 50)
• Are the cables connected correctly?
(p.17 - p.25)