Turning Off The Projector - Epson EMP-730 User Manual

Turning Off the Projector

Follow the procedure below to turn off the power of the projector.
Procedure
1 Turn off the power for the signal sources that are connected to
the projector.
Check that the power for all connected components has been turned off.
2
Press the [Power] button on either
the projector's control panel or the
remote control.
The following confirmation message will
appear.
Power OFF?
Please press
to power off .
If you do not want to turn off the power, press any button except the
[Power] button.
If you do not press any button, the message will disappear automatically
after seven seconds. (The power will not turn off at this time.)
3 Press the [Power] button once
more.
The lamp will switch off. The Power
indicator will flash orange and cool-
down will start.
4
Check that the cool-down is
complete.
When cool-down is complete, the Power
indicator lights orange.
The cool-down period lasts about 30 - 45
seconds. (This varies depending on factors
such as the ambient air temperature.)
Tip :
The projector's control panel and remote control buttons cannot be operated while the
Power indicator is flashing orange. Wait until it lights steadily.
key again
Projector
Remote control
Stops flashing and lights orange
Power
Page down Page up
Computer
S-Video/Video Color Mode
A/V Mute Freeze
Menu
E-Zoom
31