Adjusting The Sync - Epson EMP-730 User Manual

Adjusting the Image Quality

Adjusting the Sync

If flickering, fuzziness or interference appear
in images that are input from the computer,
and this cannot be fixed using automatic
adjustment, you will need to adjust the sync
manually using the following procedure.
Procedure
1 Press the [Menu] button on the
remote control, and then select
"Sync." from the "Video"
menu.
For details on this operation, refer to
"Using the Configuration Menus".
(p.57)
2
[Press the [ ] and [ ] buttons
to set the sync value.
The sync value increases or decreases
each time a button is pressed.
3
After making the adjustment, press the [Menu] button to exit
the configuration menu.
Tip :
• If you do not adjust the tracking first and then adjust the sync, it will not be possible to
get the best adjustment results. Incorrect tracking adjustment may not be noticeable
with some types of picture. However, pictures with lots of lines and shading will tend to
show incorrect tracking adjustments more clearly, so be sure to check the tracking
adjustment first.
• It may also be possible to fix flickering and fuzziness by adjusting the brightness,
contrast
40
, sharpness and keystone correction settings.
Video Position
Audio Tracking : 0000
Setting Sync . : 0
User's Logo Brightness : 0
Contrast :
Advanced 0
About Sharpness : 0
Reset All
Color Mode
Input Signal :
RGB
Auto Setup :
ON
Reset
: Return : Select : Adjust
Video Position
0000
Audio Tracking :
Setting Sync . : 10
User's Logo
Brightness : 0
Advanced Contrast :
0
Sharpness : 0
About
Reset All Color Mode
Input Signal :
RGB
Auto Setup : ON
Reset
: Adjust
: Return : Select
Adjust
- +
- +
- +
Select [Normal ]
YUV( YCbCr YPbPr)
OFF
Execute
Adjust
-
+
-
+
-
+
Select [Normal ]
YUV( YCbCr YPbPr)
OFF
Execute