Epson EMP-730 User Manual page 71

Images appear dark
• Are the image signal format settings correct?
If the "Input Signal" command in the "Video" menu is set
to "YPbPr" or "YCbCr" when a computer is connected, the
projected images will appear purplish.
If a computer, component video
connected to the projector, use the "Input Signal" command
in the "Video" menu to select the signal format which
matches the signal connected source. (p.49, 50)
If a composite video
the projector, use the "Video Signal" command in the
"Video" menu to select the video signal format. (p.51)
• Has the image contrast
"Video" - "Contrast" (p.49, 50)
• Has the color been adjusted correctly?
"Advanced" - "Color Adjustment" (p.54)
• Have the color intensity and tint been adjusted
correctly?
(The colors may not exactly match the colors in the image
on the computer screen or LCD screen, but this is normal
and is not the sign of a problem.)
"Video" - "Color", "Tint" (p.50)
• Is the lamp due for replacement?
When the lamp is nearly due for replacement, the image
will become darker and the color quality will become
poorer. When this happens, the lamp should be replaced
with a new one. (p.78)
• Is the lamp due for replacement?
When the lamp is nearly due for replacement, the image
will become darker and the color quality will become
poorer. When this happens, the lamp should be replaced
with a new one. (p.78)
• Has the image brightness been adjusted correctly?
"Video" - "Brightness" (p.49, 50)
• Has the image contrast
"Video" - "Contrast" (p.49, 50)
or RGB-Video source is
or S-Video source is connected to
been adjusted correctly?
been adjusted correctly?
69