Static Precautions; Preparing The System For Disassembly And Reassembly; Equipment Log - NEC EXPRESS5800/120Ld Service Manual

On completion of any reassembly, plug in the power cords and power on
!
the system unit.

Static Precautions

An electrostatic discharge (ESD) can damage disk drives, option boards, and
other components. You can provide some ESD protection by wearing an
antistatic wrist strap attached to chassis ground when handling system
components.
Electronic devices can be easily damaged by static electricity. To prevent
damage, keep them in their protective packaging when they are not installed in
the system.
Preparing the System for Disassembly and
Reassembly
Depending on the upgrade, you will need one or more of the following tools:
Phillips screwdriver (#1 bit and #2 bit)
!
Flat-head screwdriver
!
Small needle nose pliers
!
Pen or pencil
!
ESD workstation or antistatic wrist strap (recommended)
!

Equipment Log

Use the equipment log form located at the end of this manual to record the
model and serial number of the system, all installed options, and any other
pertinent information specific to the system. You will need this information
when configuring the system.
Dissasembly and Reassembly 4-3