When Used With One Switcher (Iss-6020/Iss-6020G - NEC MultiSync XT5000 User Manual

When Used with One Switcher (ISS-6020/ISS-6020G)

Up to 10 input signals can be accepted when the projector is connected to one Switcher. Using the projector with the Switcher allows easy
adjustment and signal selection.
Optional control cable 15p-15p
• Select [Main Menu] [Projector Options]
• For more information on the Switcher, refer to the user's manual accompanying the ISS-6020/ISS-6020G Switcher.
• All cables mentioned above are optional.
INPUT3
RGB
OPTION
IN
OUT
REMOTE1
To REMOTE1
REMOTE2
IN
OUT
(CTL-6010)
To SYSTEM CONTROL
REMOTE 1
VCR
[Switcher Control]
INPUT2 INPUT1 INPUT4
R/Cr R/Cr Cr
G/Y G/Y Y
B/Cb B/Cb Cb
H/HV H/HV
To INPUT 1
V V
INPUT5 INPUT6
S-VIDEO1
VIDEO1 VIDEO2
Y
C
S-VIDEO2
INPUT7 INPUT8
From R, G, B, H/V on separate H and
V. on the RGB OUTPUT module
The Switcher
ISS-6020/ISS-6020G
Personal computer
[SW1 Level]. See page E-40 for the information in detail.
E – 23
3BNC-3BNC cable(sync on green)
4BNC-4BNC cable(composite)
5BNC-5BNC coaxial cable
(separate sync)
(recommended)