Table of Contents
Advertisement
When Used with One Switcher (ISS-6020/ISS-6020G)
Up to 10 input signals can be accepted when the projector is connected to one Switcher. Using the projector with the Switcher
allows easy adjustment and signal selection.
REMOTE1
To REMOTE1
VIDEO
Optional control cable 15p-15p
To SYSTEM CONTROL
REMOTE 1
• Make sure that the SW1 LEVEL mode is selected from the CONNECT CONDITION menu. See page 71 for the information in
detail.
• For more information on the Switcher, refer to the user's manual accompanying the ISS-6020/ISS-6020G Switcher.
• All cables mentioned above are optional.
IN
REMOTE2
OUT
IN
OPTION
OUT
BNC RCA
VIDEO
S-VIDEO
R/Cr
5BNC-5BNC coaxial cable
(CTL-6010)
The Switcher ISS-6020/ISS-6020G
VCR
G/Y
B/Cb
H/HV
3BNC-3BNC cable(sync on green)
(separate sync)
4BNC-4BNC cable(composite)
(recommended)
Personal computer
21
V
OSD OUT
To INPUT A (RGB,H/V,V inputs)
From R, G, B, H/V on separate H and
V. on the RGB OUTPUT module
2.INSTALLATION
Advertisement
Table of Contents
