Table of Contents
Advertisement
10 INPUT 8 S-VIDEO 2Terminal (Mini DIN 4 pin)
Connect to the S-video output of the external equipment such as a
VCR with an S-video output. This terminal allows switching be-
tween S2 and S1 VIDEO input modes. See the "S-Video Mode
Select" section for more information.
Push the left side of the panel to open the compartment for
the RGB Digital connectors and the optional SDI board.
OUTPUT
INPUT9
RGB
DIGITAL
11
11 RGB Digital Input/Output Connectors (MDR 20 pin)
These connectors are used for double or triple stacking.
Use the supplied DFP cable to connect the OUTPUT terminal of
the first projector to the second projector's INPUT until all the pro-
jectors are connected. These connectors can also be used to accept
TMDS standard (Pannel Link) digital signal output from a digital
ready computer. In this case some graphics cards may cause flick-
ering noise on the screen.
List of Recommended Graphics Cards
Manufacturer
Product
I-O Data Devices, Inc.
GA-SS21P8/PCI
GA-SM02P2/CB
ATI Technologies, Inc.
Expert LCD
As of October 31, 1999
NOTE:
* These connectors support a maximum resolution of 1024 768
(XGA).
* A DFP cable must be 5 m (16.4 feet) or less in length.
* Contact your dealer for installing the optional SDI board.
OUTPUT
INPUT 0
SDI
Space to install the optional
SDI board.
Card I/F
Connector
PCI
DFP 20P
PCMCIA
DFP 20P
AGP
DFP 20P
E – 11
Advertisement
Table of Contents
