Install The Bolt Into The Door; Install The Strike Into The Frame - Schlage SENSE Installation Instructions Manual

7c

Install the bolt into the door.

Choose the picture below that matches your door.
FIgure A: Mortise
Actual Size (2)
7d Install the strike into the frame.
Install all the parts shown for maximum security.
»
In order to maintain BHMA Grade 1, you must install the included reinforcement
plate and strike.
Door Stop
Actual Size (2)
»
The reinforcement screws may not fit on doors with sidelights.
Make sure
the word
TOP faces
up when
installing
the bolt.
OR
Use a block of wood
and a hammer (not
included) to tap the bolt
into place. You don't
need to use the screws.
Reinforcement Screws: Actual Size (2)
Figure B: No Mortise
Make sure this
hole is at least 1"
(25 mm) deep.
7