Install Bolt And Strike; Adjust Bolt Length If Necessary - Schlage BE468 Manual

STEP 3

INSTALL BOLT AND STRIKE

3a:

Adjust bolt length if necessary.

Note:
the bolt is preconfigured to fit the standard door
dimensions mentioned in STEP 2. If your door matched
the measurements in STEP 2, you do not need to adjust
the length.
If the backset (see step 2) of your door was 2 ¾"
(70 mm), you need to adjust your bolt. Twist the
faceplate until the button pops into the 2 ¾" space.