I/O Module And Memory Card Installation; Installing The Aom-X10Qbi-A/L I/O Module On The Mainboard - Supermicro x10qbi User Manual

2-4

I/O Module and Memory Card Installation

Installing the AOM-X10QBi-A/L I/O Module on the
Mainboard
Note: After you've installed the CPUs and heatsinks on the baseboard,
be sure to install the AOM-X10QBi-A/L I/O module card on the SIO slot
as shown on the figure below before you power on the system. Without
the I/O module being installed on the motherboard, your system cannot
be turned on.
AOM-X10QBi-A/L I/O Module
A AOM-X10QBi-A/L
Rev. 1.02
B
LAN CTRL
C
D
E
LED28
JEDUID1
A
I/O Port Locations and Definitions
A. VGA1: VGA/Video Connector 1
B. LAN2: LAN Port2
C. LAN1: LAN Port1
D. (BMC) IPMI_LAN
E. UID (Unit Identifier) Switch & UID LED (Blue: Unit Identified)
F. VGA2: VGA/Video Connector 2
G. COM2: COM Connection 2
Jumpers
1. JPL1: LAN Enable/Disable (Default: Pins 1-2: Enabled)
2. JPB1: BMC Enable/Disable (Default: Pins 1-2: Enabled)
3. JPG1: VGA Enable/Disable (Default: Pins 1-2: Enabled)
SIO Slot
F
1 2 3
JPL1 JPB1 JPG1
BMC
D
B C
2-11
Chapter 2: Installation
G
CPU1
CPU2
E
X10QBi
Rev:1.01B
BAR CODE
MAC CODE
MAC CODE
CPU3
CPU4
G