Memory Support And Installation - Supermicro X13DGU User Manual

Table of Contents

Advertisement

2.4 Memory Support and Installation

Note: Check the Supermicro website for recommended memory modules.
Important: Exercise extreme care when installing or removing memory modules to
prevent any possible damage.
Memory Support
This motherboard supports up to 8TB 3DS RDIMM/RDIMM DDR5 (288-pin) ECC memory with
speeds up to 5600MT/s (1DPC) or 4400MT/s (2DPC) in 32 DIMM configuration (Note below).
Note: Memory speed and capacity support depends on the processors used in the
system.
Parameters
Number of Channels per Socket
Number of DIMMs per Channel
DIMM Type
DIMM Construction
DDR5 Memory Support for 4th/5th Gen Intel Xeon Scalable Processors
DDR5 Memory Support for the 4th Gen Intel Xeon Scalable Processors
Type
RDIMM
RDIMM 3DS
LRDIMM/LRDIMM-3DS
Note 1: 1DPC (1 DIMM Per Memory Channel) applies to 1 SPC (Sockets Per Chan-
nel) or 2 SPC implementation.
Note 2: 24Gb XCC only with limited configs: 1DPC all DIMM type, 2DPC 96GB only.
Only 8 and 16 DIMM configs, no fallbacks.
Note 3: Memory speed will be 4800MT/s 1DPC or 4400MT/s 2DPC.
Note 4: Mixing DRAM Density (16 Gb/24 Gb) and/or Frequency is not allowed.
Key Parameters for DIMM Configurations
1DPC (1 DIMM Per Channel) or 2DPC (2 DIMMs Per Channel)
non-3DS RDIMM Raw Cards: A (2Rx4), C (1Rx4), D (1Rx8), E (2Rx8)
3DS RDIMM Raw Cards: A (4Rx4, 8Rx4)
9x4 RDIMM Raw Cards: B (2Rx4), F (1Rx4)
Ranks Per DIMM
DIMM Capacity (GB)
& Data Width
(Stack)
16Gb
SRx8 (RC D)
16GB
SRx4 (RC C)
32GB
SRx4 (RC F) 9x4
32GB
DRx8 (RC E)
32GB
DRx4 (RC A))
64GB
DRx4 (RC B) 9x4
64GB
2H-128GB
(4R/8R) x4 (RC A)
4H-256GB
N/A
N/A
61
Chapter 2: Installation
Possible Values
1, 2, 4, 6, 8
RDIMM and 3DS RDIMM
Speed (MT/s); Voltage (V);
DIMM Per Channel (DPC)
1DPC (Note)
24Gb
1.1V
24GB
48GB
N/A
48GB
4800
96GB
N/A
N/A
N/A
Not Supported
2DPC
4400
Not Supported

Advertisement

Table of Contents
loading

Table of Contents