Table of Contents
Advertisement
o To cancel a time delay that has been set, you should press and
hold the delay start button (D) until the indicator light goes OFF
and the stop light blinks.
o You can then start the program manually by press
Pause button (C) or switch the appliance off by turning the
program selection knob (K) to the OFF position.
Saving energy when using your washing machine
o To prevent any possible w
recommend that you put a full load in your washing machine but
without exceeding the recommended maximum load size. Up to
50% of energy saving can be made with one full load compared
to two half load washes.
o Only use the pre-wash function with particularly dirty loads.
Energy savings of 5% to 15% can be made by not selecting the
pre-wash option for normal soiled laundry.
o Using stain removers before machine washing reduces the need
to wash at temperatures over
50% can be made by using a 60°C wash temperature rather
than 90°C.
Automatic consumption reduction
o The washing machine is fitted with an automatic consumption
reduction system which enables the machine to use the amount
of water needed to wash and rinse the laundry in relation to the
particular load size.
o This results in a reduction in the amount of water used and
electricity needed to heat it to the minimum temperature
required
without
performance in any way.
o The amount of water and electricity used will always be
appropriate for the amount of laundry which ensures you achieve
excellent washing results whilst respecting the environment and
saving money.
aste of energy, water or detergent, we
60°C. Energy savings of up to
compromising
the
ing the Start /
washing
and
rinsing
21
Advertisement
Table of Contents
