Setting Up A Direct Connection To A Smartphone - Panasonic HC-WXF990M Operating Instructions Manual

9
(When selecting [WEP]/[TKIP]/[AES])
Touch [INPUT], then enter the Password.
≥ For details on how to enter characters, refer to page 117.
≥ When the entry is complete, touch [Enter].
≥ A message is displayed when the connection is complete. Touch [EXIT], and exit [Set Wireless
Access Point].
Confirming that the Wi-Fi connection is complete
j The status indicator of this unit is lit green
is displayed on the screen
j
≥ Check the wireless access points instruction manual and settings when a saving wireless access
point.
≥ The Encryption methods are [AES], [TKIP] and [WEP] in descending order of strength. We
recommend you connect with the strongest possible Encryption method.
≥ When the signal of the wireless access point is weak, a connection may not be established. Refer
to "Messages" (l
≥ Transmission speed may decrease, or may not be usable depending on the environment it is
used in.
Setting up a connection manually

Setting up a direct connection to a smartphone

Check the [Direct Connection Password] setting in [Wi-Fi Setup]. (
≥ The default setting is [OFF].
Select [ON] as needed, for example when the setting seems necessary for your Wi-Fi
environment.
≥ When [Direct Connection Password] is set to [OFF]
j Proceed to the following section, "When [Direct Connection Password] is set to [OFF]" in
"Using [Remote Ctrl] with a direct connection".
≥ When [Direct Connection Password] is set to [ON]
If your smartphone is compatible with WPS, refer to "[Easy Connection (WPS)]". If not, refer to
"Connecting with QR code".
j Proceed to the following [Easy Connection (WPS)]
j Proceed to the "Connecting with QR code"
j Proceed to the "Connecting by entering an SSID and Password"
When the Wi-Fi connection is complete, refer to "When [Direct Connection Password] is set to [ON]"
in "Using [Remote Ctrl] with a direct connection".
[Easy Connection (WPS)]
1
Press Wi-Fi button on this unit and touch [Wi-Fi Setup].
2
Touch [Direct Connection].
3
Touch [Change connection type].
4
Touch [Easy Connection (WPS)].
5
Turn on the Wi-Fi function in the smartphone's setup menu.
243) and "Troubleshooting" (l 245) for details.
(l 164)
(l 195)
(l 165)
- 194 -
200)
l
(l 196)