Panasonic HC-WXF990M Operating Instructions Manual page 140

2
Select the video input on the TV.
≥ Example:
Select the [HDMI] channel with an HDMI micro cable.
Select the [Video 2] channel with an AV cable.
(The name of the channel may differ depending on the connected TV.)
≥ Check the input setting (input switch) and the audio input setting on the TV. (For more
information, please read the operating instructions for the TV.)
3
Change the mode to
≥ When this unit and the TV are connected with the HDMI micro cable (supplied) or an AV cable
(commercially-available) in any of the following situations, no image will be displayed on the TV.
Use the LCD monitor of this unit.
j When recording a motion picture or using PRE-REC in HDR Movie Mode*
j When [HDMI RESOLUTION] is set to [576p] in HDR Movie Mode
j FULL HD Slow Motion Video Mode
j When recording a motion picture with [Backup for Twin Camera] set to [ON] or during PRE-REC
j When [REC FORMAT] is set to [4K MP4], when recording a motion picture in 4K Photo Mode
or during PRE-REC
j When recording a motion picture with [REC FORMAT] set to [24p] or during PRE-REC
j When saving a scene previewed with 4K Cropping
j When saving the Highlight Playback scene or a manually edited scene
*2
j When copying
WXF990
j (For the
Slow & Quick Video Mode
≥ If you connect this unit to the TV when this unit is set to Recording Mode, a squealing sound
may be output. Before connecting this unit, set it to Playback Mode.
≥ When connected to the TV, sound in Playback Mode is not output from this unit. Also, since the
volume cannot be adjusted with this unit, adjust the volume of the TV.
≥ Some screens, such as the menu screen, may be displayed in reduced sizes on the TV.
≥ Image and audio is not output from this unit while using the Wi-Fi function.
*1 In addition, when the devices are connected with an AV cable (commercially-available), no
image is displayed while recording is paused.
WXF990M
*2 (For the
When copying between the SD card and the built-in memory, this restriction applies only if you
convert the recording format
*3 The microphone may pick up the sound from the speakers, producing an abnormal sound.
∫ To watch images on a regular
TV (4:3) or when both sides of
the images do not appear on
the screen
Change the menu setting to display the images
correctly. (Check the TV setting.)
: [SETUP] # [TV ASPECT] # [4:3]
MENU
Example of images with a 16:9 aspect ratio
on a regular TV (4:3)
to play back.
/performing [CONVERT TO MP4]/performing [Slow Speed Conversion]
VXF990
series/ )
VX980M
/ )
[TV ASPECT] setting
[16:9]
≥ If a wide-screen TV is connected, adjust the
aspect setting on the TV. (Refer to the
operating instructions of the TV for details.)
- 140 -
1
*3
[4:3]