Dividing A Scene (Avchd/Backup For Twin Camera) - Panasonic HC-WXF990M Operating Instructions Manual

Dividing a scene (AVCHD/Backup for Twin Camera)

It is possible to divide an AVCHD scene or a scene recorded as Backup for Twin Camera.
Any unwanted parts in the scene can be deleted after dividing.
≥ Touch the play mode select icon on the thumbnail screen in Playback Mode, and select
scenes recorded as [AVCHD] or Backup for Twin Camera.
1
Select the menu.
: [EDIT SCENE] # [DIVIDE] # [SET]
MENU
2
Touch and play back the scene you want to divide.
≥ It is convenient to use Slow-motion Playback and Frame-by-frame Playback.
3
Touch to set the dividing point.
≥ Touch [YES].
≥ Touch [YES] to continue dividing the same scene. To continue
dividing other scenes, touch [NO] and repeat Steps 2-3.
4
Touch [Return] to complete dividing.
≥ Unwanted parts can be deleted.
To delete all the divided points
: [EDIT SCENE] # [DIVIDE] # [CANCEL ALL]
MENU
≥ The scenes that were deleted after division cannot be recovered.
≥ You cannot divide a scene if the number of scenes of a given date would exceed 99 scenes.
≥ It may not be possible to divide scenes with a short recording time.
≥ Data that has been recorded or edited on another device cannot be divided and the divided points
cannot be deleted.
(l 129)
- 132 -
(l 34)
(l 104)
0h01m30s 0h01m30s 0h01m30s