Setting Up A Direct Connection To A Smartphone - Panasonic HC-V750 Operating Instructions Manual

Setting up a direct connection to a smartphone

Check if the smartphone you are using is compatible with WPS
j If the smartphone is compatible with WPS:
Proceed to the following [Easy Connection (WPS)]
j If the smartphone is not compatible with WPS:
Proceed to the following "Connecting with QR code"
[Easy Connection (WPS)]
1
Press Wi-Fi button and touch [Wi-Fi Setup].
2
Touch [Direct Connection].
3
Touch [Change connection type].
4
Touch [Easy Connection (WPS)].
5
Set the smartphone to WPS Mode.
Confirming that the Wi-Fi connection is complete
j The status indicator of this unit is lit green
is displayed on the screen
j
Connecting with QR code
1
Press Wi-Fi button and touch [Wi-Fi Setup].
2
Touch [Direct Connection].
3
Touch [Change connection type].
4
Touch [QR code].
≥ QR code is displayed on the screen of this unit.
5
Start up the smartphone application "Image App".
6
On the smartphone, select [QR code], and scan the QR code displayed on the
screen of this unit.
≥ When using an Android device, the smartphone and this unit are connected directly, allowing you
to use remote operations.
≥ When using an iOS device, perform the following operations:
1 Select the option that allows you to install the app on the profile screen of the "Image App", and
follow the on-screen instructions to complete the installation.
2 Press the home button to close the displayed screen.
3 Select the network name (SSID) of this unit from the Wi-Fi setup of the smartphone.
≥ When the QR code cannot be scanned, refer to "Connecting by entering an SSID and Password".
(l 178)
Confirming that the Wi-Fi connection is complete
j The status indicator of this unit is lit green
is displayed on the screen
j
(l 144)
- 177 -