Connecting To A Wireless Access Point - Panasonic HC-WXF990M Operating Instructions Manual

Connecting to a wireless access point

Check if the wireless access point you are using is compatible with WPS
j If the wireless access point is compatible with WPS:
Proceed to the following [Easy Connection (WPS)]
j If the wireless access point is not compatible with WPS:
"Searching for wireless access points to set up a connection"
[Easy Connection (WPS)]
1
Press Wi-Fi button on this unit.
2
Touch [Wi-Fi Setup].
3
Touch [Set Wireless Access Point].
4
Touch the part with no display of a wireless
access point C.
≥ For information on how to delete wireless access points or
change the search order of wireless access points, please
refer to [Set Wireless Access Point] on page 199.
5
Touch [Easy Connection (WPS)].
6
Set the wireless access point to waiting for WPS.
≥ For further details, please read the operating instructions for the
wireless access point. (When using a tethering connection, please
read the operating instructions for the smartphone.)
≥ A message is displayed when the connection is complete. Touch
[EXIT], and exit [Set Wireless Access Point].
≥ A message is displayed when the connection attempt fails. Touch
[EXIT], and set the connection again.
- 191 -
(l 192)
  
A [Delete]
B [EXIT]
