Relay Rec - Panasonic HC-WXF990M Operating Instructions Manual

≥ When [REC FORMAT] is set to [AVCHD]
[PH]/[HA]/[HG]/[HE]:
(A
B)
*3
[1080/50p] :
A Favours image quality
B Favours Recording time
≥ When [REC FORMAT] is set to [24p]
[2160/24p]:
[1080/24p]:
*1 [1080/50M]/[1080/28M] and [720] are recording modes suitable for playing back or editing on a
PC.
*2 [iFrame] is a format suitable for Mac (iMovie etc.). It is recommended for when using a Mac.
*3 You can record motion pictures in 1080/50p (1920k1080/50 progressive), the best AVCHD
picture quality for this unit.
≥ Please refer to page
≥ Use an SD card conforming to Class 10 of the SD Speed Class Rating when you want to
record motion pictures to the SD card using the setting [1080/50M].
≥ Please refer to page
≥ When the unit is moved a lot or moved quickly, or when a fast-moving subject is recorded,
mosaic-type noise may appear at playback.
WXF990M VX980M
/

[RELAY REC]

It is possible to continuously record motion picture to an SD card when there is no space available
in the built-in memory. (It allows you to record only to SD card from built-in memory.)
≥ Set [MEDIA SELECT] to [Built-inMemory].
≥ Set [REC FORMAT] to [AVCHD].
≥ Insert an SD card.
: [RECORD SETUP] # [RELAY REC] # [ON]
MENU
is displayed on the screen.
≥
and the recording to the SD card starts.
≥ Relay Recording can only be performed once.
≥ Combine the scenes that were relay-recorded using the [RELAY SCENE COMBINE] into
the SD card. (l 138, 144)
≥ Once you have performed [RELAY SCENE COMBINE], you can use the Relay Recording
function again. If the [RELAY REC] is set to [ON] without performing the [RELAY SCENE
COMBINE], a message is displayed. You will be able to perform Relay Recording by touching
[YES], but you will not be able to perform the [RELAY SCENE COMBINE] after that.
≥ Still pictures are recorded to the SD card after Relay Recording.
is displayed on the thumbnail display during the playback of the scene that was relay-
≥
recorded on the built-in memory.
Set the recording format to 1080/50i.
Set the recording format to 1080/50p.
Set the recording format to 2160/24p (72 Mbps).
Set the recording format to 1080/24p (50 Mbps).
13 for details about recordable time using the battery.
256 for details about approximate recordable time.
(l
will disappear when space in the built-in memory is gone
91)
- 92 -