Using [Remote Ctrl] With A Wireless Access Point Connection - Panasonic HC-WXF990M Operating Instructions Manual

When [Direct Connection Password] is set to [ON]
≥ Proceed to Step 5 when your Wi-Fi connection has been made via [Direct Connection] in [Wi-Fi Setup]
1
Press Wi-Fi button on this unit and touch [Remote Ctrl].
≥ (If you have touched [Remote Ctrl] for the first time)
A message will be displayed asking whether to connect to a wireless access point. Touch [NO].
≥ If a wireless access point is already registered in [Set Wireless Access Point] in [Wi-Fi Setup],
priority will be given to a connection using the wireless access point. A connection using the
wireless access point will be established for remote operations.
2
Touch [Wi-Fi].
≥ It will go into connection standby for remote operation.
3
Turn on the Wi-Fi function in the smartphone's setup menu.
4
On the smartphone's Wi-Fi setting screen, select the SSID displayed on this unit.
≥ If this is the first time the smartphone is connecting to this unit via Wi-Fi, enter the Password
displayed on this unit's screen into the smartphone.
≥ It may take time to complete the Wi-Fi connection.
5
When the Wi-Fi connection is complete, press the home button on the
smartphone and start up the smartphone application "Image App".
≥ When the connection to this unit is complete, the image from this unit is displayed on the
smartphone screen. Control this unit remotely with the smartphone.
To exit [Remote Ctrl]
Touch [EXIT] or press Wi-Fi button.
message is displayed.
≥ The
≥ The following operations allow you to register up to ten smartphones. If the number exceeds ten,
smartphone information with the oldest registration date and time will be deleted.
j Setting [Direct Connection Password] to [OFF] and connecting this unit and a smartphone directly.
Using [Remote Ctrl] with a wireless access point
connection
≥ Proceed to Step 2 when your Wi-Fi connection has been made via [Set Wireless Access Point] in
[Wi-Fi Setup] (l 191
1
Press Wi-Fi button on this unit.
2
Touch [Remote Ctrl] on the Wi-Fi menu screen.
≥ It will go into connection standby for remote operation.
3
Connect the smartphone to a wireless access point.
4
Start up the smartphone application "Image App".
≥ When the connection to this unit is complete, the image from this unit is displayed on the smartphone screen.
Control this unit remotely with the smartphone.
To exit [Remote Ctrl]:
Touch [EXIT] or press Wi-Fi button.
message is displayed.
≥ The
Touch [YES] to close the indication.
to 194).
Touch [YES] to close the indication.
- 165 -
(l 194).