Connecting With An Hdmi Micro Cable - Panasonic HC-WXF990M Operating Instructions Manual

∫ To display the on-screen
information on the TV
When the menu setting is changed, the
information displayed on the screen (operation
icon and time code etc.) can be displayed/not
displayed on the TV.
: [SETUP] # [EXT. DISPLAY] #
MENU
desired setting
Refer to the following support site for information about Panasonic TVs with an SD card
slot for playing back your pictures.
http://panasonic.net/
≥ It may not be possible to play back scenes on the TV depending on the [REC FORMAT] or
[REC MODE].
≥ For details on how to play back, please read the operating instructions for the TV.

Connecting with an HDMI micro cable

Select the desired method of HDMI output.
: [SETUP] # [HDMI RESOLUTION] # [AUTO]/[2160p]/[1080p]/[1080i]/[576p]
MENU
≥ [AUTO] determines the output resolution automatically based on information from the connected
TV.
If the images are not output on the TV when the setting is [AUTO], switch to the method [2160p],
[1080p], [1080i] or [576p] which enables the images to be displayed on your TV. (Please read the
operating instructions for the TV.)
≥ Images may not be displayed on the television for several seconds in some cases, such as when
changing between scenes.
≥ Even if you select [2160p], images are output in 1080p in the following cases:
j When this unit is connected to a TV that does not support 4K motion picture
j When [REC FORMAT] is set to [AVCHD] or [MP4/iFrame] in Recording Mode
j When [REC FORMAT] is set to [24p] and [REC MODE] is set to [1080/24p] in Recording Mode
j When a scene other than a [4K MP4] or [2160/24p] scene is played back in Playback Mode
j When you start a 4K Cropping preview in Playback Mode
j When this unit is set to Still Picture Recording Mode or when you play back a still picture
≥ You can output 2160/24p scenes
supports 4K motion picture and setting [HDMI RESOLUTION] to [AUTO] or [2160p].
In the following situations, the scenes cannot be output in 24 frames per second and instead they
will be output in 1080/60p, 1080/60i or 480/60p. (The setting varies depending on the
specifications of the TV and the [HDMI RESOLUTION] setting.)
j When this unit is connected to a TV that does not support 4K motion picture
j When [HDMI RESOLUTION] is set to a setting other than [AUTO] or [2160p]
*2
≥ 1080/24p scenes
1080/60p, 1080/60i or 480/60p. (The setting varies depending on the specifications of the TV and
the [HDMI RESOLUTION] setting.)
*1
in 24 frames per second by connecting this unit to a TV that
cannot be output in 24 frames per second and instead they will be output in
*4
[SIMPLE] :
[DETAIL]:
[OFF]:
*4 This setting is only available in Motion
Picture Recording Mode or Still Picture
Recording Mode.
- 141 -
Information partially
displayed
Detailed information
displayed
Not displayed