Setting Up A Direct Connection To A Smartphone - Panasonic HC-W580 Basic Owner's Manual

Setting up a direct connection to a smartphone

Check the [Direct Connection Password] setting in [Wi-Fi Setup].
≥ The default setting is [OFF].
Select [ON] as needed, for example when the setting seems necessary for your Wi-Fi
environment.
≥ When [Direct Connection Password] is set to [OFF]
j Proceed to the following section, "When [Direct Connection Password] is set to [OFF]" in
"Using [Link to Cell] with a direct connection".
≥ When [Direct Connection Password] is set to [ON]
If your smartphone is compatible with WPS, refer to "[WPS Connection]". If not, refer to
"Connecting with QR code".
[HC-W580PP]/[HC-V380PP]:
Enter SSID and Password or scan QR code to connect.
j Proceed to the following [WPS Connection]
j Proceed to the "Connecting with QR code"
j Proceed to the "Connecting by entering an SSID and Password"
When the Wi-Fi connection is complete, refer to "When [Direct Connection Password] is set to
[ON]" in "Using [Link to Cell] with a direct connection".
[WPS Connection]
1
Press Wi-Fi button on this unit and touch [Wi-Fi Setup].
2
Touch [Direct Connection].
3
Touch [Change connection type].
4
Touch [WPS Connection].
5
Turn on the Wi-Fi function in the smartphone's setup menu.
6
Set the smartphone to WPS Mode.
Confirming that the Wi-Fi connection is complete
j The status indicator of this unit is lit green
is displayed on the screen
j
(l 133)
(l 166)
(l 134)
- 165 -
(l 171)
(l 166)