Using [Hom.monitor] - Panasonic HC-WXF990M Operating Instructions Manual

Using [Hom.Monitor]

≥ Perform the home monitoring operation on the smartphone.
≥ When the firewall is turned on, the Wi-Fi function may not work correctly. If this occurs, check the
network settings.
When using the home monitor function for the first time
≥ Proceed to Step 2 when your Wi-Fi connection has been made via [Set Wireless Access Point] in
[Wi-Fi Setup] (l 191
1
Press Wi-Fi button on this unit.
2
Touch [Hom.Monitor] on the Wi-Fi menu screen.
3
Turn off the Wi-Fi setting of the smartphone.
4
Start up the smartphone application "Image App".
≥ (If the device is Android™)
When a Wi-Fi connection guidance screen is displayed, select [No].
≥ (If the device is iOS)
If a confirmation message for the Wi-Fi setup is displayed, select [Close].
5
Enable the home monitoring setting from the menu of the smartphone
application "Image App".
(MENU)] # [Application function] # [Home Monitor], and enable [Use Home
≥ Select [
Monitor].
6
Select [Set connect. dest.] of the smartphone.
7
Enter the Device ID and Password displayed on the screen of this unit into
the smartphone.
≥ When the entry is complete, select [OK] (on your Android device) or [Complete] (on your iOS
device).
≥ If you want to check the Device ID and Password after performing Step 8, on the screen of this
unit, touch [Setup] # [Home Monitor Connect].
8
Touch [ENTER] on the screen of this unit.
≥ Check that the message "Connecting..." has disappeared from this unit.
9
On the smartphone, select [Start Home Monitor] to start home monitoring.
∫ When configuring the home monitor settings using QR code
≥ Proceed to Step 2 when your Wi-Fi connection has been made via [Set Wireless Access Point] in
[Wi-Fi Setup] (l 191
1
Press Wi-Fi button on this unit.
2
Touch [Hom.Monitor] on the Wi-Fi menu screen.
3
Touch [QR code].
≥ QR code is displayed on the screen of this unit.
4
Turn off the Wi-Fi setting of the smartphone.
to 194).
to 194).
- 172 -
(l 174)