Terminating The Connection - Panasonic HC-WXF990M Operating Instructions Manual

≥ This unit and the smartphone will be connected via Wi-Fi. When the connection to this unit is complete,
the image being captured by the smartphone will be displayed on the Sub Window of this unit.
≥ If the connection cannot be established or no image appears on the Sub Window, follow the steps
below to set up the connection again:
1 Touch the screen of this unit and touch
2 Touch [Change Device] on the screen of this unit.
3 Close the smartphone application "Image App", and then touch [Reset] on the device registration screen.
4 Touch [YES].
After completing the steps above, follow the procedure from Step 2 onwards in "Selecting this unit's
SSID on the smartphone to set up a connection" in "When connecting a smartphone to this unit as a
Wireless Sub Camera for the first time (To use the Wireless Multi-Camera function)".
To replace the registered smartphones
1
Press Wi-Fi button on this unit and touch
[Multi Camera].
2
Touch the name of the registered device you
want to replace.
≥ Close the smartphone application "Image App", and then
follow the procedure from Step 3 on page 212.
≥ To set up a connection by scanning a QR code, follow
the procedure from Step 3 on page
≥ When the connection to this unit is complete, the device
name will be changed to that of the newly-registered device.
To clear all of the registered smartphones
Close the smartphone application "Image App", and then touch [Reset] on the device
registration screen.
≥ A message will be displayed. Touching [YES] will clear all the registered information, and device
names will be indicated as [Unregistered].
≥ Wi-Fi connections made with the Wireless Multi-Camera function are not saved as records in [History].

Terminating the connection

1
Touch the recording screen on this unit and
touch .
2
Touch [EXIT] on the screen of this unit.
≥ The Wi-Fi connection will be terminated.
≥ Close the "Image App" on the smartphone.
≥ You can also terminate the connection by pressing the Wi-Fi button on this unit.
If you press the Wi-Fi button during recording pause, a message will be displayed. To terminate
the connection, touch [YES].
.
214 .
- 216 -

C [Reset]
D [ENTER]
(l 212)
