Using The [Wi-Fi Setup Wizard] To Set Up A Connection - Panasonic HC-WXF990M Operating Instructions Manual

Using the [Wi-Fi Setup Wizard] to set up a connection

With the smartphone application "Image App", you can transfer the following information between
the smartphone and this unit.
≥ Set [Direct Connection Password] in [Wi-Fi Setup] to [ON].
(The default setting is [OFF].)
Set on the smartphone and
transfer to this unit
Transfer from this unit to the
smartphone
* Acquire a Login ID and Password for the "LUMIX CLUB" on this unit in advance.
≥ Install the smartphone application "Image App" on your smartphone.
1
Press Wi-Fi button on this unit and touch [Wi-Fi Setup].
2
Touch [Wi-Fi Setup Wizard].
3
Touch [YES].
4
Touch [QR code] or [Wi-Fi].
When [QR code] is selected
1 Start up the smartphone application "Image App".
2 On the smartphone, select [QR code] to scan the QR code displayed on the
screen of this unit.
≥ The setup screen is displayed on the smartphone.
≥ When using an iOS device, perform the following operations:
1 Select the option that allows you to install the app on the profile screen of the "Image App", and
follow the on-screen instructions to complete the installation.
2 Press the home button to close the displayed screen.
3 Touch [NEXT] on the screen of this unit to display its SSID.
4 After selecting the network name (SSID) of this unit from the Wi-Fi setup of the smartphone,
start up "Image App".
3 Follow the on-screen instructions of the smartphone to set up a connection.
≥ When the settings is complete, the smartphone and this unit are connected directly, allowing you
to use remote operations.
Control this unit remotely with the smartphone.
When [Wi-Fi] is selected
1 Turn on the Wi-Fi function in the smartphone's setup menu.
2 On the smartphone's Wi-Fi setting screen, select the SSID displayed on this unit.
≥ If this is the first time the smartphone is connecting to this unit via Wi-Fi, enter the Password
displayed on this unit's screen into the smartphone.
≥ It may take time to complete the Wi-Fi connection.
3 When the Wi-Fi connection is complete, press the home button on the
smartphone and start up the smartphone application "Image App".
4 Follow the on-screen instructions of the smartphone to set up a connection.
≥ When the settings is complete, the smartphone and this unit are connected directly, allowing you
to use remote operations.
Control this unit remotely with the smartphone.
≥ Clock information
≥ Information on wireless access points (SSIDs and Passwords)
≥ "LUMIX CLUB" Login ID, Password
≥ Device ID for home monitoring
(l 166)
(l 166)
- 190 -
(l 200)
*
(l 188)