Adjusting The Picture And The Audio - NEC MultiSync GT2000 User Manual

ADJUSTING THE PICTURE AND THE AUDIO (Picture)
These functions adjust the picture and audio with the on-screen menu display.
When the input signal is selected with the user memory or the channel memory and the auto memory save function is set to [On],
the adjustment data is overwritten.
Default Picture Settings
Picture settings at the time of shipping from the factory are as described below.
Please set required items.
Press the MENU button to display [Main Menu], select [Picture] with the cursor button, then press the ENTER button to display
the picture.
Main Menu
Picture
Alignment
Memory
Switcher
Display Menu
Settings Menu
Source
Adjusting the Picture (Brightness, Contrast, Color, Tint, and Sharpness)
Adjust these items to an optimum level in conjunction with the input image.
Select [Picture] from the main menu, then press the ENTER button.
When the item to be adjusted is selected, the adjustment bar of the selected item is displayed at the bottom edge of the display.
Change to the (–) direction
The various adjustment ranges are from -31 to +32.
Picture
Brightness
Contrast
Volume
Color
Tint
Sharpness
Image Mode
White Balance
Scan Mode
Interpolation
RGB/YCbCr
–
-
+
Change to the (+) direction
+ 0
Picture
Brightness
Contrast
Volume
Color
Tint
Sharpness
Image Mode
White Balance
Scan Mode
Interpolation
RGB/YCbCr
–
E-44
Settings at the Time of
Shipping from the Factory
Names of items that cannot
be adjusted with the cur-
rently selected input mode
are displayed in gray.
Normal
Auto
PC Mode
RGB
Contents of the selected item
are displayed.
+ -10