NEC GT1150 Installation Data

Desktop and ceiling mount
Hide thumbs Also See for GT1150:

Advertisement

GT1150/2150 Installation Data
Desktop and Ceiling Mount
Contents
Projection Distances and Screen Sizes
Ceiling Mount Dimensions

Product Description

Type:
3 panel, 1.3" p-Si TFT w/MLA LCD projector
Native Resolution:
GT1150: 1024 x 768
GT2150: 1366 x 1024
Brightness:
GT1150: 3000 ANSI Lumens
GT2150: 2500 ANSI Lumens

Lens Specifications

GT10RL
Throw Ratio:
Screen Sizes:
GT13ZL
Throw Ratio:
Screen Sizes:
GT19ZL
Throw Ratio:
Screen Sizes:
GT24ZL
Throw Ratio:
Screen Sizes:
GT34ZL
Throw Ratio:
Screen Sizes:
Notes
For screen sizes not indicated on the projection tables, use the formulas below.
If the figures on the tables do not match the results of formulas, use the figures in the table.
The ceiling must be strong enough to support the LCD projector and the installation must be in accordance with any local
building codes.
All calculations are based on 4:3 aspect ratio.
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.
Formulas
Units: Inches (for millimeters multiply final number by 25.4)
Definitions: H = Horizontal Screen Width (4:3)
V = Vertical Screen Height (4:3)
C = Throw Distance
Projection Formulas:
GT10RL: C = 1.027H - 2.468
GT13ZL: C(Wide) = 1.3099H - 2.325 ------- C(Tele) = 1.6111H - 2.325
GT19ZL: C(Wide) = 1.8639H - 3.228 ------- C(Tele) = 2.4231H - 3.228
GT24ZL: C(Wide) = 2.4282H - 4.799 ------- C(Tele) = 3.5209H - 4.799
GT34ZL: C(Wide) = 3.5523H - 6.786 ------- C(Tele) = 5.3284H - 6.786
1.0:1(approx.)
40"-300"
1.3 - 1.6:1(approx.)
40" - 300"
1.8 - 2.4:1(approx.)
40" - 300"
2.4 - 3.4:1(approx.)
60" - 400"
3.4 - 5.2:1(approx.)
80" - 500"
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Dimensions: 16.5"(W) x 8.25"(H) x 19.45"(D)
Weight:
GT1150: 22.1 lbs w/o lens
GT2150: 28.3 lbs w/o lens
Power Lens Shift/Power Zoom/Power Focus
Focal Length:
27mm
F/#:
2.3
Focal Length:
34.5 - 42.5mm
F/#:
2.3 - 2.8
Focal Length:
48.9 - 63.7mm
F/#:
2.0 - 2.5
Focal Length:
64.0 - 92.8mm
F/#:
2.5 - 3.2
Focal Length:
92.4 - 140.6mm
F/#:
2.5 - 3.4
Screen Formulas:
H = Screen Diagonal x 4/5
V = Screen Diagonal x 3/5
Screen Diagonal = H x 5/4
Visual Systems
Rev 3.0
Page 1

Advertisement

Table of Contents
loading

Summary of Contents for NEC GT1150

  • Page 1: Table Of Contents

    If the figures on the tables do not match the results of formulas, use the figures in the table. The ceiling must be strong enough to support the LCD projector and the installation must be in accordance with any local building codes.
  • Page 2: Ceiling Mount Installation

    Desktop and Ceiling Mount Projection Distance and Screen Size for Ceiling Mount The following shows the proper relative position of the projector and screen. Refer to the table for installation data. Distances are in inches. For millimeters multiply by 25.4.
  • Page 3: Desktop Setup

    GT1150/2150 Installation Data Desktop and Ceiling Mount Projection Distance and Screen Size for Desktop The following diagram shows the relationship between projector position and the screen. Distances are in inches. For millimeters multiply by 25.4. Desktop Setup Screen Ctr Note: Lens shift is not available on GT10RL(rear lens). GT10RL should be used only for “zero degree/no-offset” applications.
  • Page 4: Lens Shift Adjustable Range

    GT1150/2150 Installation Data Desktop and Ceiling Mount Lens Shift Adjustable Range Desktop/Front Vertical Normal Position Ceiling/Front Vertical Normal Position Horizontal Normal Position Lens Shift Range for Desktop and Ceiling Mount Application The diagram below shows the location of the image position in the lens.
  • Page 5: Cabinet Dimensions

    GT1150/2150 Installation Data Desktop and Ceiling Mount Cabinet Dimensions The following diagrams show the cabinet dimensions for the GT1150/2150. Dimensions are in inches. For millimeters multiply by 25.4. GT2150 16.50 1150 PC CONTROL REMOTE REMOTE @1 SC TRIGGER AC IN `...
  • Page 6: Bottom, Back And Left Side

    GT1150/2150 Installation Data Desktop and Ceiling Mount Cabinet Dimensions (continued) The following diagrams show the cabinet dimensions for the GT1150/2150. Dimensions are in inches. For millimeters multiply by 25.4. MAX 4-M4X8 Visual Systems Rev 3.0 Page 6...
  • Page 7: Top, Front And Left Side

    GT1150/2150 Installation Data Desktop and Ceiling Mount Optional Ceiling Mount Dimensions (Model #: GT50CM) The following diagrams show ceiling mount dimensions for the GT1150/2150. Dimensions are in inches. For millimeters multiply by 25.4. 9.50 2.22 2.44 10.04 8.22 9.79 10.04 Visual Systems Rev 3.0...
  • Page 8: Bottom, Back And Right Side

    GT1150/2150 Installation Data Desktop and Ceiling Mount Optional Ceiling Mount Dimensions (Model #: GT50CM) (continued) The following diagrams show ceiling mount dimensions for the GT1150/2150. Dimensions are in inches. For millimeters multiply by 25.4. 10.686 1.355 10.50 10.775 Visual Systems 10.00...
  • Page 9: Pc Control Codes

    Communications: Full duplex PC Control Connector (D-Sub 9P) NOTE: Pins 1, 4, 6, and 9 are used inside the projector. Jumper “Request to send” and “Clear to Send” together on both ends of the cable to simplify cable connection. To TxD of PC...

This manual is also suitable for:

Gt2150Lcdgt2150

Table of Contents