NEC MultiSync GT2000 User Manual page 36

SETUP (Various Settings)
Please make settings in conjunction with both the projector and the system.
NOTE: To accommodate worldwide use of the projector, the default language setting for the projector is English. See below for the
detailed setting procedure. Descriptions given here assume that the language setting of the unit has already been set to English.
Default Settings of the Settings Menu
The unit is set as described below before it is shipped from the factory.
Please set any required items.
Press the MENU button to display [Main Menu], then select [Settings Menu] with the cursor button and press the ENTER button
to display the various settings.
Main Menu
Picture
Alignment
Memory
Switcher
Display Menu
Settings Menu
Source
To turn off the on-screen menu display, press the
MENU button.
The display will return to the main menu. Press the
MENU button again to turn off the on-screen
menu.
Selecting the On-screen Language
[Language]
This is the language selection for the display characters of
the on-screen menu and other displays.
1. Select [Settings Menu]
2. Press the cursor / button and select the language, then
press the ENTER button to set.
[Language] from the main menu.
Settings Menu
Language
Background
Auto Start
Auto Save
Onscreen Mute
Switcher Control
Ext. Control
Projector ID
Sync Termination
Projection
Keystone
Keystone Save
English
Language
English
Deutsch
Français
Italianno
Espanol
Svenska
E-36
Setting at Time of
Factory Shipping
English
Blue back
Off
Off
Off
Standalone
Off
00
Hi-impedance
Front Floor
00
Off
Currently selected
item