AT&T SB67020 Quick Start Manual page 17

Call Transfer/Do Not Disturb Setup
To Transfer a Call:
1. Press from the Active Call screen. The call is put on hold.
2. Place another call. You can also transfer to a held call by accessing it and
pressing SELECT. If desired, you can announce the transfer.
3. To complete the transfer, press
two seconds.
The above procedure applies to Call Appearance mode only. If your system
uses Line Appearance mode, see the User's Guide at
www.telephones.att.com/synapseguides for additional transfer options.
To Enable or Disable Do Not Disturb (DND):
Press MENU, then 1, and then 5 (Call Appearance mode) or MENU, then 1, and then
4 (Line Appearance mode) to toggle the Do Not Disturb feature On or Off.
DND appears on the Idle screen when DND is on. Do Not Disturb silences incoming ringing and paging. Incoming calls
can still be answered as long as the Call Appearance or Line Appearance LED is flashing.
. The Call Transferred screen displays for
17