Renkforce DAB-RCD3038 Operating Instructions Manual page 62

Operation
Button functions
• BND/LOU/ENT button (6)
With this button you can select the band range of the FM radio unit. There are 3 FM and 2 MW areas available:
F1 > F2 > F3 > AM1 > AM2

On each of the band ranges, 6 stations can be stored on the station button 1-6 (26).
•  (15) and  (5) buttons
With these buttons the receiving frequency can be changed to adjust stations in radio operation.
Briefly pushing a button starts the automatic station search (display shows SEARCH).
The auto-scan only stops at the next station that can be received well.
By pushing a button longer, you activate manual station scan.
The display shows MANUAL.
In this mode, the frequency is changed until you release the corresponding button again. Brief pushes of this button
changes the frequency step by step.

If buttons are not pressed for a longer period of time, the devices switches back to automatic station
search. The display shows AUTO.
• Station buttons 1-6 (26)
If you briefly push these buttons, you can select a station you have pre-set.
If you want to store a station you are listening to, simply push the desired button for more than 1 second.

Every one of the three FM ranges (F1-3) and the AM reception ranges (MW1-2) has six station buttons.
Therefore you can assign 30 station buttons.
62
Operating Instructions

English