Renkforce DAB-RCD3038 Operating Instructions Manual page 58

Operation
• DSP (12) button
With this button various information can be displayed on the LC display (7). Press the button once more to move to
the next display.
When the button is not activated anymore, the display returns to the original information after a little while.
The button can also be used to set the time manually.
Switching the display information
Push the button DSP (12) briefly to call the display information as follows:
When an RDS station is being received
Radio operation: Station name > Time > Program type
CD-/MP3 operation: Track display > Time > ID3 Tag Infos > Station name > Transmission frequency > Program type
When no RDS station is being received
Radio operation: Transmission frequency > Time > PTY NONE
CD-/MP3 operation: Track display > Time > ID3 Tag Infos > Station name > Transmission frequency > PTY NONE
Setting the time
Push the button DSP (12) briefly until the time is displayed.
Then hold the button DSP (12) pushed until the time display flashes.
Use the button  (5) to set the minutes and the button  (15) to set the hours.
• RESET button
This button is behind the front cover next to the contacts for the operating unit and resets all the settings to the original
settings that were made in the factory.
Press this button in the following cases with a pointy object:
- when you have completed the installation and connection
- when the CD tuner does not react to the operation of buttons anymore
- when the display shows undefined characters
58
Operating Instructions

English