Renkforce DAB-RCD3038 Operating Instructions Manual page 57

Operation
• BND/LOU/ENT button (6)
This button is used to switch the loudness function on/off.
Press and hold the button to trigger the loudness function:
LOUD ON: The loudness function is active.
LOUD OFF: The loudness function is inactive. The sound is not influenced.

At low volumes the human ear does not perceive very low and very high sounds well. An increase of
the frequency range for low volume (loudness correction) counteracts this effect and the music replay
sounds more natural.
• LC Display (7)
The LC-display (7) shows all the information, depending on the audio source that is being played (radio,
CD-player etc.).
• EQ button (22)
Push this button to switch between the different equaliser settings:
FLAT: The equaliser is active, but there is no sound adaptation.
CLASSICS: The sound characteristic is adapted to classical music.
POP M: The sound characteristic is adapted to pop music.
ROCK M: The sound characteristic is adapted to rock music.
DSP OFF: The equaliser is switched off.
57