Carson Airbeast 507013 Instruction Manual page 14

Now reassemble the housing using the four Phillips head
GB
screws. Ensure that no cables are trapped or damaged during
reassembly.
Before operating your helicopter, ensure that the two centre
servo reverse switches on the front of the transmitter are set in
the upper position.
Your rnodel and your transrnitter have now been converted to
mode 1.
This means:
Rotation leftlrlght and forwardsfbackwards left joystick
Throttle upidown and roll leftiright
14 CARSON Helicopter Airbeast 507013
011640_anl_507013_airbeast_6k.in14 14 011640_anl_507013_airbeast_6k.in14 14
Picture 6
Picture 7
right joystick
08.01.2008 11:40:32 Uhr 08.01.2008 11:40:32 Uhr