Now mount the metal clip on to the left side according to
picture.
On the right hand side you attach the spring according to
picture 4. The spring adjuster is mounted by using a Phillips
head screw and the spring is put into the holder by means of
tweezers.
On the mother board (ill. 5) there is a small connector with
a jumper which has to be carefully moved into the position
required.
Jumper upwards
mode1
Jumper downwards
mode 2
Caution – do not to damage the plate!
011640_anl_507013_airbeast_6k.in13 13
011640_anl_507013_airbeast_6k.in13 13
Picture 3
Picture 5
CARSON Helicopter Airbeast 507013
Picture 4
13
08.01.2008 9:01:07 Uhr
08.01.2008 9:01:07 Uhr
GB