Service Time Setting - Nilfisk-ALTO NEPTUNE 1 Service Manual

Service time setting.

Fig.G.11: Jumper JP2.
Step:
Switch the machine off with S1 (main switch).
Plug jumper on JP2.
Start the machine in cold water mode with S1 (main switch).
Old service time value is displayed for 5 seconds.
Choose with S2 (temp. Adjustment) the right service time : default value is 200hours.
Switch the machine to hot water mode with S1 (main Switch)
The new service time interval is now stored in the EEProm..
The stored value is displayed at the led's and they are flashing.
Switch the machine off with S1 (main switch).
Remove the jumper from JP2.
Service LED
Time Operation
100h OFF
200h OFF
300h OFF
400h OFF
500h ON
Fig.G.13: LED lights.
NEPTUNE 1&2_EN_Ver.2.1_45/2014
Adjustment / Test
LED LED
Fuel Anti Stone
OFF OFF
OFF OFF
OFF ON
ON ON
ON ON
Fig.G.12: S1 & S2 switches.
LED
Service Boiler Service
OFF
ON
ON
ON
regardless
ON
LED LED
Flame Sensor
ON
ON
ON
ON
ON/OFF
(EXH-T) ON
G
102