Mounting Or Removing Backrest - Vermeiren Squod Instruction Manual

2.3.1 Assembly of the electric wheelchair
To assembly the electric wheelchair:
1. Mount the backrest (paragraph 2.4).
2. Place the batteries on the lower frame (paragraph 2.5).
3. Place the battery cover on the batteries (paragraph 2.5).
4. Mount the seat to the seat frame (paragraph 2.6)
5. Mount the arm supports (paragraph 2.7).
6. Mount the footrests (paragraph 2.8).
7. Fold the footplates of the footrests down.
To disassembly the electric wheelchair do the reverse of the above instructions.
2.4

Mounting or removing backrest

L L L L
WARNING:
Risk of injury – Make sure that both securing levers
L L L L
CAUTION:
Chance of pinching – Do not place fingers between the backrest tubes
of the wheelchair.
For transport the backrest of the wheelchair can be completely removed and put on the seat.
To mount the backrest on the electric wheelchair:
1. Check that the levers
loosen the levers
2. Mount the backrest tubes Ⓐ in the hexagonal
tubes of the frame Ⓑ.
3. Retighten the levers
To remove the backrest
wheelchair:
1. Turn on the levers
2. Remove the backrest tubes Ⓐ out the hexagonal
tubes of the frame Ⓑ.
3. Put the backrest on the seat for transportation.
Page 10
are engaged.
are not fixated otherwise
.
properly.
from the
until they come loose.
Squod
2013-09
electric