Mounting Or Removing Batteries - Vermeiren Squod Instruction Manual

2.5

Mounting or removing batteries

L L L L
CAUTION:
Chance of pinching – Do not place fingers between the batteries and
the battery housing.
To mount the batteries in the electric wheelchair:
1. Batteries are located on the back side of the wheelchair.
2. Place the batteries
3. Connect the cables from the electronic.
4. Mount the bar in the two holes of the battery housing
5. Place the battery cover
cover over the bar
6. Screw the star buttons
7. Check that the battery housing is firmly attached.
8. Mount the seat.
To remove the batteries of the electric wheelchair:
1. Remove the seat.
2. Loosen the star buttons
3. Remove the battery cover
4. Remove the bar
5. Disconnect the cables from the electronic.
6. Lift the batteries
on the battery housing of the wheelchair
on the battery housing, by placing the two holes of the battery
.
in the holes of the battery cover
.
from the battery housing
out the two holes of the battery housing
out the battery housing
Page 11
.
.
on each side.
.
.
.
Squod
2013-09