Stop Bits; Data Bits - Motorola PL3307 Integration Manual

8 - 10 PL3307 Decoder Integration Guide

Stop Bits

The stop bit(s) at the end of each transmitted character marks the end of transmission of one character and
prepares the receiving device for the next character in the serial data stream. Select the number of stop bits
(one or two) based on the number the receiving device is programmed to accommodate.
*
1 Stop Bit

Data Bits

This parameter allows the decoder to interface with devices requiring a 7-bit or 8-bit ASCII protocol.
7-Bit
2 Stop Bits
*
8-Bit