Illumination Brightness; Presentation Mode Field Of View - Motorola PL3307 Integration Manual

Illumination Brightness

Parameter # F1h 9Dh
This feature sets the brightness of the illumination by altering LED power. The default is 10, which is maximum
LED brightness. For values from 1 to 10, LED brightness varies from lowest to highest level of brightness.
To program Illumination Brightness, scan this bar code followed by two numeric bar codes in
Numeric Bar Codes that correspond to the value of desired illumination brightness. For example, to set
Illumination Brightness to 6, scan the bar code below followed by the 0 and 6 bar codes.

Presentation Mode Field of View

Parameter # F1h 61h
In Presentation Mode , by default the decoder searches for a bar code in a smaller region around the aiming
pattern's center to speed search time.
To use a full field of view, scan Presentation Mode Full Field of View . This allows the decoder to search the
larger area of the aiming pattern.
*Presentation Mode Default Field of View
(01h)
Imaging Preferences
Illumination Brightness
Presentation Mode Full Field of View
(02h)
5 - 7
Appendix D,