Event Reporting; Decode Event - Motorola PL3307 Integration Manual

Event Reporting

The host can request the decoder to provide certain information (events) relative to the decoder's behavior.
Enable or disable the events listed in
codes.
Event Codes
Table 7-4
Event Class

Decode Event

Boot Up Event
Parameter Event
Decode Event
Parameter # F0h, 00h
When enabled, the decoder generates a message to the host upon a successful bar code decode. When
disabled, no notification is sent.
Enable Decode Event
Table 7-4
Event
Non parameter decode
System power-up
Parameter entry error
Parameter stored
Defaults set (and parameter event is
enabled by default)
Number expected
(01h)
and on the following pages by scanning the appropriate bar
Code Reported
0x01
0x03
0x07
0x08
0x0A
0x0F
*Disable Decode Event
SSI Interface 7 - 19
(00h)