Host Character Time-Out - Motorola PL3307 Integration Manual

7 - 16 PL3307 Decoder Integration Guide

Host Character Time-out

Parameter # EFh
This parameter determines the maximum time the decoder waits between characters transmitted by the host
before discarding the received data and declaring an error.
To set the delay period (options are 200, 500, 750, or 990 ms), scan one of the following bar codes.
NOTE Other values are available via SSI command.
*Low - 200 ms
High - 750 ms
(14h)
(4Bh)
Medium - 500 ms
(32h)
Maximum - 990 ms
(63h)