Boot Up Event; Parameter Event - Motorola PL3307 Integration Manual

7 - 20 PL3307 Decoder Integration Guide

Boot Up Event

Parameter # F0h, 02h
When enabled, the decoder generates a message to the host whenever power is applied. When disabled, no
notification is sent.
Enable Boot Up Event

Parameter Event

Parameter # F0h, 03h
When enabled, the decoder generates a message to the host when one of the events specified in
page 7-19 occurs. When disabled, no notification is sent.
Enable Parameter Event
(01h)
(01h)
*Disable Boot Up Event
(00h)
*Disable Parameter Event
(00h)
Table 7-4 on