Advertisement
Quick Links
ORICOM CUSTOMER SUPPORT
Oricom have a trained and dedicated team of Customer Support
Representatives, each with the knowledge and resources to assist in
answering your questions quickly and efficiently.
Oricom Support - Australia
For all product enquiries, troubleshooting or to discuss the range of Oricom
products, feel free to contact Oricom or visit our website for answers to
frequently asked questions.
02 4574 8888
Monday - Friday 8am – 6pm AEST
Email: support@oricom.com.au
www.oricom.com.au
Oricom Support - New Zealand
0800 674 266
Monday - Friday 11am - 7pm NZST
Email: support@oricom.co.nz
Ref: 21102020
Advertisement
Related Manuals for Oricom Babysense 7
Summary of Contents for Oricom Babysense 7
- Page 1 Oricom Support - Australia For all product enquiries, troubleshooting or to discuss the range of Oricom products, feel free to contact Oricom or visit our website for answers to frequently asked questions. 02 4574 8888 Monday - Friday 8am –...
- Page 2 Babysense User Guide Babysense7 is included as a medical device on the Australian Register of Therapeutic Goods (ARTG No. 97479) Babysense7 is intended for use as an Infant Apnoea Alarm. ALWAYS READ THE LABEL AND USER GUIDE, USE ONLY AS DIRECTED. Please retain your purchase receipt and attach to the back page of this user guide.
-
Page 3: Table Of Contents
Installation ................5 Operation ................9 Troubleshooting Guide ............13 Express Warranty (Australia) ..........15 Need Help? If you need assistance setting up or using your Oricom Babysense7 now or in the future, call Oricom Product Support. Australia (02) 4574 8888 www.oricom.com.au Mon-Fri 8am – 6pm AEST... -
Page 4: Important Use And Safety Warning
Important Use And Safety Warning IMPORTANT USE AND SAFETY WARNING It is essential that all users of your Babysense7 monitor read and understand this user guide thoroughly before installing or using the product. This user guide contains detailed information on installation and operation of the Babysense7 monitor which all users need to be aware of to ensure that the monitor operates properly. - Page 5 • Please remove batteries if the device is not in use for more than 3 months. • If you have any problems with this device, such as setting up, maintaining or using, please contact Oricom. Also please report any unexpected operation or events that occur.
-
Page 6: General Information
• Two sensor pads • Two reuseable plastic cable ties Requires 4 AA size, 1.5 volt high quality Alkaline batteries (not supplied). DO NOT use rechargeable batteries. If any items are missing from the pack, please call Oricom Customer Support. - Page 7 General Information Technical Specifications • Powered by 4 size AA, 1.5 volt high quality Alkaline batteries (not supplied). Power consumption approx. 1mA. DO NOT use rechargeable batteries. • Battery life approx. 6 months using high quality alkaline batteries. • Alarm volume typically 85dB SPL at distance of one metre from control unit. •...
-
Page 8: Installation
Installation Installation 1. Remove battery cover by inserting a flat screw driver into the opening recess and insert, in accordance with the markings, 4 new and identical size AA 1.5 volt high quality Alkaline batteries, close cover. Note: Please dispose of used batteries in accordance with local waste regulations. - Page 9 Installation PLEASE NOTE: The sensors shall be placed with the marking “THIS SIDE UP” facing upwards. Sensor pads (Under mattress) Control unit Top crib/bed view Top crib/bed view For babies not For crawling babies yet able to crawl Illustration 2 4.
- Page 10 Installation 5. Attach end(s) of the cord(s) to the outlets marked "SENSOR" on the back of control unit (as shown in illustration 4 and 5). When using one sensor pad, attach to any “SENSOR” outlet. PLEASE NOTE: Do not attach any cable to the blocked socket, marked "DO NOT USE".
- Page 11 Installation 7. Press control unit holder or hanging hook firmly into slot in back of control unit as shown in illustration 5 and 6. Illustration 6 Slot “Sensor” socket Sensor Do not use Sensor Blocked socket DO NOT USE Opening recess Battery cover...
-
Page 12: Operation
Operation Layout of control unit See illustration 7 for layout of control unit featuring: • On/Off button. • Green movement indicator light. • Green power light. • Acoustic and visual red alarm light. • Low battery red warning light. Green power light Red low battery warning light... - Page 13 Operation • The green movement indicator light shows that the control unit is turned on and monitoring baby (it does not represent babies breathing rate). • Acoustic and visual red alarm light are activated if baby's breathing movement rate stops or slows significantly (below 10 breaths per minute).
- Page 14 Operation Technical malfunction In order to minimize technical problems, follow installation and operation instructions carefully. Potential environmental disturbances Due to the extreme sensitivity of Babysense7, it can be influenced by fans, wind, air conditioning, humidifier, cot mobile, ceiling projector etc. Such environmental effects could be picked up by the sensors on a similar level to that of breathing movements, thus preventing or delaying alarm activation.
- Page 15 Babysense7. Do not use Babysense7 with a memory foam mattress. • In case of false alarms, kindly refer to troubleshooting guide. Please contact Oricom Customer Support team with any product related questions. Please note Babysense7 monitors and alerts with respect to breathing movement rates, but cannot prevent cessation of breathing.
- Page 16 2 years of use. Use only Babysense7 sensor pads. To order replacement sensor pads (2B0093), contact Oricom Support (02) 4574 8888, support@oricom.com.au Made by Hisense Ltd. an ISO 9001 and ISO 13485 certified company.
-
Page 17: Troubleshooting Guide
Troubleshooting Guide Troubleshooting Guide Symptom Possible Cause Solution Lights on • Batteries are not • Check batteries are inserted in the Control Unit Control Unit inserted correctly or observing the correct polarity. don’t illuminate may be flat. • Control Unit requires 4 X AA 1.5V Alkaline when turned batteries (not supplied). - Page 18 - If the alarm does not sound within 20 seconds, connect one sensor only and continue using the product. Contact Oricom Support for further guidance. For all product related questions and warranty support, please call Oricom Customer Support team on (02) 4574 8888.
-
Page 19: Express Warranty (Australia)
In the event of a minor failure, Oricom reserves the right to choose to repair or replace the product. - Page 20 No change to the conditions of this Express Warranty is valid unless it is made in writing and signed by an authorised representative of Oricom. Oricom will not be liable under this Express Warranty, and to the extent permitted by law will not be liable for any defect, loss, damage or injury arising out of or in connection with a: 1.
- Page 21 • A copy of your Proof of Purchase (please keep your original copy) • The faulty product, including all accessories. Send the approved returns to: Oricom International Pty Ltd Locked Bag 658 South Windsor NSW 2756 Australia Please note that this Express Warranty excludes expenses incurred by you in returning any faulty product to us.
Need help?
Do you have a question about the Babysense 7 and is the answer not in the manual?
Questions and answers