Operating the Gigaset SL910A base answering machine
Operating when on the move (remote operation)
Check or activate the answering machine from another telephone (e.g., hotel,
mobile phone).
Prerequisites: The current system PIN is set to something other than 0000
¢
(
page 77) and the other telephone has tone dialling (DTMF). Alternatively, you
can use a code transmitter (available from retailers).
Activating the answering machine
Prerequisite: The answering machine is deactivated.
¤
Call your phone line and let it ring until you hear: "Please enter PIN".
¤
Enter the system PIN for your phone within 10 seconds.
Calling the answering machine and playing back messages
Prerequisite: The answering machine is activated.
¤
Call your phone line and press 9 when you hear your announcement.
your phone's system PIN.
You can operate the answering machine with the keypad.
The following keys are used:
A
B
3
D
0
:
Cancelling remote operation
¤
Press the end call key or replace the earpiece.
Please note
The answering machine will terminate the connection under the following cir-
cumstances:
u
An incorrect system PIN has been entered.
u
There are no messages in the answering machine.
u
After the remaining memory has been specified.
56
During the time stamp playback:
Skip to previous message.
During message playback:
Go to the start of the current message.
Stop playback. Press again to resume.
After a pause of approx. 60 seconds, the connection is ended.
Go to the next message.
Skip back five seconds in the current message.
Delete current message.
Change the status of a previously played back message to "new".
¤
Enter