Operating Information; Light Emitting Diodes (Led) - Gigaset N720 DECT IP Installation, Configuration & Operation

Operating information

Operating information

Light emitting diodes (LED)

LEDs on the DECT Manager
Power/LAN VoIP
Off Off
Flashes Off
(every two
seconds)
On Off
On Flashes
(every four
seconds)
On On
On On
On On
On On
Flashes Flashes
(every two (every two
seconds) seconds)
Other displays:
u
The second LED from the top (Power/LAN) flickers when you are restoring the factory
settings to indicate that the resetting process will begin as soon as you release the
reset button (
u
All LEDs light up for one second when the device has been successfully reset to static
IP addresses (
22
From top to bottom
DECT
Connection status to the base stations
Power/LAN
Power supply status If the power supply is OK, the LED
indicates the LAN connection status.
VoIP
VoIP connections status (activation and registration)
CALL
Active call display
RESET
Reset button (
DECT
Off
Off
Off
Off
Off
Flashes
(every four
seconds)
On
On
Off
£
page 24).
£
page 25) or to DHCP (
£
page 24)
CALL Description
Off No power supply / No supply voltage
Off No LAN connection or waiting for
address to be assigned by the DHCP
server
Off IP address assigned by DHCP, VoIP
service not (yet) available
Off At least one VoIP service activated,
waiting for SIP registration
Off All activated VoIP services
successfully registered
Off At least one base station connected
Off All registered base stations
connected
On At least one active call
Off Firmware is being updated
£
page 25).