Listening In To An External Call - Gigaset SL910 Manual

Accepting/rejecting call waiting
External call during an internal call
¤
Accept the call: Touch Accept. The internal call is placed on hold.
¤
Reject the call: Touch Reject.
Internal call during an external call
You will hear a single beep tone and receive a corresponding message.
¤
Accept the call: Touch Accept. The external call is placed on hold.
¤
Reject the call: Touch Reject. The internal caller hears the engaged tone.
Establishing a conference call/call swapping
During an external call, you have set up an internal consultation call or accepted an
internal call waiting.
¤
Call swapping: Touch the participant with whom you wish to speak.
¤
Establish a three-way conference call: Touch [
¤
End conference call: Touch [
ping" and are again connected to the participant with whom you initiated the
conference call.
Each of the callers can end their participation in the conference call by pressing the
end call key and terminating the call.

Listening in to an external call

You are conducting an external call. An internal participant can listen in on this call
and take part in the conversation (conference).
Activating/deactivating listening in
¤
In the Settings menu (
vate the function with the button next to Listening In.
Internal listening in
The line is engaged with an external call. Your screen will display information to that
effect. You can listen in to the external call.
Prerequisite: The Listening In function is activated, no more than two participants
are taking part in the external call and the call is not being recorded by the answer-
ing machine.
¤
Press and hold c. All participants hear a signal tone. Call waiting is not dis-
played.
Ending listening in
¤
Press a. All participants hear a signal tone.
T
End Conference]. You return to "call swap-
¢
page 24), touch [ « Telephony].
Using multiple handsets
T
Conference].
¤
Activate/deacti-
69