Using The Phone; Activating/Deactivating The Handset; Operating The Touchscreen - Gigaset SL910 Manual

Using the phone

Activating/deactivating the handset

¤
Press and hold the end call key a in idle status to deactivate the handset.
You will hear a melody.
¤
Press and hold the end call key a again to reactivate the handset.

Operating the touchscreen

The Gigaset SL910H handset is primarily operated using the display and only to a
small extent using the three buttons on the handset.
Icons, list entries, buttons and sliders shown on the display are sensitive areas. You
can set up and activate functions, enter or dial phone numbers and navigate
between the various display screens (pages) by touching these areas and dragging
them across the display.
Selecting functions/list entries
To activate a function or select a list item (Contacts, submenu, call list), simply tap
your finger on the corresponding icon or on the required list entry on the display.
Activating/deactivating functions
Functions, e.g., room monitor, answering machine, are activated and deactivated
via buttons.
If the button slider is to the right, the func-
tion is activated. The area to the left of the
slider is highlighted (on).
If the button slider is to the left, the func-
tion is deactivated (off). The area to the
right of the slider is black.
There are two ways to operate a button:
¤
Slowly drag the slider to the right or left to activate or deactivate the function.
¤
Touch the area to the right or left of the slider briefly and the slider moves to the
right or left to the area that has been touched.
Using the phone
Function on Function off
on
Slider Slider
On off
21