To Dial A Number From Memory; To Delete Memory Content; Recall; Handset Locator (Paging Function) - Sanyo CLT-D14 Instruction Manual

BASICS

To dial a number from memory

1. Make sure the phone is OFF (not in TALK mode).
2. Press repeatedly to scroll to the number you want to dial.
OR
Press key then press numeric key (0-9) to select the desired
number.
3. Press the
Remark: If the phone number contains more than 10 digits, press
the key will toggle the display to display the "remaining" digits.
To delete memory contents
1. Press then
2. Press key repeatedly until the number you wish to delete is
displayed.
3. Long press
4. Press key to confirm, and confirmation tone can be heard.

Recall

Recall is used to access special telephone service. Contact your
local telephone company for details. If your unit is connected to a
PBX, press the
PBX such as transferring an extension call.

Handset Locator (Paging Function)

This feature helps to locate a misplaced handset.
Press [ Page ] button on the base, the handset will
beep continuously for 60 seconds or until until you
do one of the following:
1. Press key on the handset.
2. Press [ Page ] key again.
key
to enter the memory editing mode.
key to clear the stored number.
/ R key allows you to access some features of your
13
DELETE
ON/OFF
MEMO OGM
Page
Charge