To Adjust The Receiver Volume; Mute Key; To Mute The Microphone; Pre-Dialing - Sanyo CLT-D14 Instruction Manual

Dect tam with caller id
Table of Contents

Advertisement

BASICS

To adjust the receiver volume

1. When the phone is on hook, press
handset enters the receiver volume adjustment mode. There are
three receiver levels of low, medium and high selections by
pressing the [1], [2] and [3] keys respectively.
2. Once the selection key is pressed, press the
the new setting. If the
receiver level is restored.

Mute Key

To have a private, off-line conversation, use the MUTE feature. The
caller on the other end of the line cannot hear you, but you can hear
them

To mute the microphone

1. While a call is in progress, press the
symbol (
2. Press the
Pre-dialing (up to 18 digits)
1. When the phone is OFF (not in TALK mode), enter the telephone
number. The number is displayed as you enter it. If you want to
correct a wrong entry digit, press the
entered digit.
2. After you have completed the entry of the telephone number, press
the
key to switch to TALK mode and the entered number will
be dialed automatically.
) will appear on the LCD.
key again to resume your telephone conversation.
and then the [4] key. The
key is pressed instead, the original
11
key again to store
key once. The Mute
key to remove the last

Advertisement

Table of Contents
loading

Table of Contents