2.4-ghz digital spread spectrum cordless telephone with call manager features (52 pages)
Summary of Contents for Sanyo CLT-2435
Page 1
All manuals and user guides at all-guides.com CLT2435 ENG-5/28 5/28/01 13:46 Page i INSTRUCTION MANUAL CLT-2435 2.4-GHz Digital Spread Spectrum Cordless Telephone with Call Manager Features IMPORTANT Charge the handset battery pack for a full 15 hours before using your cordless handset for the first time.
Page 2
13:50 Page ii Introduction Congratulations on your purchase of the CLT-2435 cordless telephone. This phone is designed for reliability, long life, and outstanding performance utilizing the latest in 2.4-GHz Digital Spread Spectrum technology. Note: Some illustrations in this manual may differ from the actual unit for explanation purposes.
Page 3
All manuals and user guides at all-guides.com CLT2435 ENG-5/28 5/28/01 13:46 Page iii Controls and functions 1. Handset antenna 12. SERVICE MENU key 2. Headset jack cover 13. REDIAL/PAUSE key 3. HandsFree speaker 14. Microphone 4. Battery compartment 15. CALL REVIEW/VOLUME (up) key 5.
Page 4
All manuals and user guides at all-guides.com CLT2435 ENG-5/28 5/28/01 13:46 Page iv 22. Handset retainer 23. Base charging contacts 24. INTERCOM/PAGE/FIND key 25. FLASH key 26. SPEAKER key 27. REDIAL/PAUSE key 28. MEMORY key 29. CALLERS indicator 30. CHARGE/IN USE indicator 31.
Pre-programmed calling features...........E44 Adding new features .................E45 Call Waiting with Options..............E47 Additional Information Changing the digital security code ..........E48 Installing the belt clip.................E49 Headset installation ................E49 Note on power source...............E50 Maintenance ..................E50 Troubleshooting................E51 Technical Information ..............E52 Warranty ...................E53 Sanyo-On-Site (SOS) Information ..........E54...
All manuals and user guides at all-guides.com CLT2435 ENG-5/28 5/28/01 13:46 Page 2 GETTING STARTED Read this first This cordless telephone must be set up before use. Follow these steps: Step 1 (page E3) Unpack and check the telephone and accessories. Step 2 (page E4 to E8) Choose the best location to set...
Make sure you have received the following items in the package. • AC adaptor • Base unit • Handset (AD-350) • Bottom bracket • Rechargeable • Telephone line for desktop use battery pack cord (1) and wall-mounting (SANYO 3KR-600AAL) • This Owner's Manual • Belt clip...
All manuals and user guides at all-guides.com CLT2435 ENG-5/28 5/28/01 13:46 Page 4 GETTING STARTED Setting up the base unit Avoid places near electrical equipment such as refrigerators, computers, TVs, microwaves or fluorescent lamps. These may cause interference or reduce the operating range of the cordless telephone.
All manuals and user guides at all-guides.com CLT2435 ENG-5/28 5/28/01 13:46 Page 5 GETTING STARTED Desktop use Connect the base unit If you want to install the base unit on the wall, see page E7. To AC outlet To DC IN 9V AC adaptor (supplied) To telephone outlet...
Page 10
All manuals and user guides at all-guides.com CLT2435 ENG-5/28 5/28/01 13:46 Page 6 GETTING STARTED Notes: • Use only the supplied AD-350 AC adaptor. Do not use any other AC adaptor. • Connect the AC adaptor to a continuous power supply. •...
All manuals and user guides at all-guides.com CLT2435 ENG-5/28 5/28/01 13:46 Page 7 GETTING STARTED Mounting the base unit on a wall Standard wall plate mounting This phone can be mounted on any standard telephone wall plate. Attach the bottom bracket to the base as shown.
Page 12
All manuals and user guides at all-guides.com CLT2435 ENG-5/28 5/28/01 13:46 Page 8 GETTING STARTED On the base unit, pull the handset retainer out Handset retainer of the slot. Rotate it clockwise 180 degrees. Flip the retainer. Slide it back into the slot so that the lip of the retainer is up and the points down.
AC adaptor is plugged in and that the handset makes good contact with the base charging contacts. Note: CHARGE/IN USE Use only the battery pack supplied or the specified Sanyo types with your phone. Type: SANYO 3KR-600AAL or SANYO/GE GES-PCF01...
Page 14
All manuals and user guides at all-guides.com CLT2435 ENG-5/28 5/28/01 13:46 Page 10 GETTING STARTED Battery use time (per charge) With a fully charged battery: • Six hours continuous use. • Ten days when the handset is in the standby mode. Note: While Voice Mail is displayed the battery discharges faster than in normal standby mode.
All manuals and user guides at all-guides.com CLT2435 ENG-5/28 5/28/01 13:46 Page 11 BASICS Making a call With the handset Dialing from standby mode Enter the phone number. (Up to 32 digits.) Example: Enter 9057609944 9057609944 Press TALK/END or SPEAKER Talk flashes in the display.
All manuals and user guides at all-guides.com CLT2435 ENG-5/28 5/28/01 13:46 Page 12 BASICS Dialing from talk mode Press TALK/END or SPEAKER Talk flashes on the display. Press TALK/END Press SPEAKER Talk Talk The volume setting is displayed. For example, if the volume is set to high, the display shows: Talk Talk <High>...
Page 17
All manuals and user guides at all-guides.com CLT2435 ENG-5/28 5/28/01 13:46 Page 13 BASICS With the base Press SPEAKER on the base. The SPEAKER indicator lights. Dial the number on the keypad. When you finish the call, press SPEAKER on the base to hang up.
All manuals and user guides at all-guides.com CLT2435 ENG-5/28 5/28/01 13:46 Page 14 BASICS Receiving a call With the handset Incoming call The phone rings. appears. Incoming Call Press TALK/END or SPEAKER Talk , the call time display and the volume setting appear. You can also press SPEAKER on the handset to answer the call.
All manuals and user guides at all-guides.com CLT2435 ENG-5/28 5/28/01 13:46 Page 15 BASICS With the base The base rings. The CHARGE/IN USE indicator flashes. Press SPEAKER. When you finish the call, press SPEAKER to hang up. Call Waiting Note: You must subscribe to Call Waiting service to use this feature. When a call is received during a telephone call already in progress, you hear a beep.
All manuals and user guides at all-guides.com CLT2435 ENG-5/28 5/28/01 13:46 Page 16 BASICS Lighted keypad The dialing keypad and the TALK/END key on the handset light up when you press any key on the keypad. The light turns off if no key is pressed within 5 seconds. Scanning Your phone automatically selects the clearest possible channel every time you receive or place a call.
All manuals and user guides at all-guides.com CLT2435 ENG-5/28 5/28/01 13:46 Page 17 BASICS Redialing a call With the handset The last three phone numbers dialed can be quickly redialed. Redialing from standby mode Press REDIAL/PAUSE. The phone number that was last dialed appears in the display.
Page 22
All manuals and user guides at all-guides.com CLT2435 ENG-5/28 5/28/01 13:46 Page 18 BASICS Redialing from talk mode Press TALK/END. Talk appears on the display. Talk Talk <High> Press REDIAL/PAUSE. The last number dialed will be displayed. Only the last number dialed can be accessed while in talk mode.
All manuals and user guides at all-guides.com CLT2435 ENG-5/28 5/28/01 13:46 Page 19 DIRECTORY/ SPEED-DIAL The handset and base each has its own memory for storing phone numbers. The handset directory can store 20 names/numbers, while the base speed-dial memory holds up to 10 numbers.
Page 24
For example, if you store a name and number into memory location number 07, Memory07 Stored Memory07 Stored the display shows Memory Store After about 2 seconds, Memory Store is displayed. 07 SANYO Press MEMORY to return to standby mode.
Page 25
Memory dialing from standby mode Press MEMORY. The handset displays your programmed memory locations. A beep sounds. 01 SANYO 02 Alison McNab 03 MOM AND DAD Press , or enter a two-digit number (01– 20) to select the memory location you would like to dial.
Page 26
DIRECTORY/ SPEED-DIAL Display a programmed number to toggle between the name display and the number display. Name display Number display 01 SANYO 01 9057609944 02 Alison McNab 02 5452930 03 MOM AND DAD 03 8175551212 When the stored phone number has 14 or more digits, “ \ ” is displayed next Note: to the 12th digit.
Page 27
Press and hold MEMORY until the display shows Memory Store screen and any stored name/number. A beep sounds. Memory Store 01 SANYO 02 Alison McNab Press , or enter a two-digit number (01–20) to select the memory location you want to edit.
Page 28
02, the display shows Memory02 stored Memory Store Memory Store After about 2 seconds, 01 SANYO is displayed. 02 Alison McNab Press MEMORY or place the handset on the base to return to standby. Display a programmed number to switch between the name display and the number display.
Page 29
Press and hold MEMORY until the display shows the Memory Store screen and any stored name/number. A beep sounds. Memory Store 01 SANYO 02 Alison McNab Press , or enter a two-digit number (01– 20) to select the memory location you want to edit.
All manuals and user guides at all-guides.com CLT2435 ENG-5/28 5/28/01 13:46 Page 26 DIRECTORY/ SPEED-DIAL Using the base station speed-dial memory Storing numbers in the speed-dial memory You can store only numbers in the base memory. Press MEMORY. The CHARGE/IN USE indicator blinks.
Page 31
All manuals and user guides at all-guides.com CLT2435 ENG-5/28 5/28/01 13:46 Page 27 DIRECTORY/ SPEED-DIAL Dialing a number from the speed-dial memory Press SPEAKER. The SPEAKER indicator lights. Press MEMORY and enter the memory location number (0–9) on the keypad. Then the stored number will be dialed.
All manuals and user guides at all-guides.com CLT2435 ENG-5/28 5/28/01 13:46 Page 28 CALLER ID FEATURES Caller ID You must subscribe to the Caller ID service from your local telephone company to use this feature. When the telephone rings, the Caller ID feature allows you to view the caller's name and phone number on the display before you answer the phone.
Page 33
All manuals and user guides at all-guides.com CLT2435 ENG-5/28 5/28/01 13:46 Page 29 CALLER ID FEATURES To change your Caller ID options: Press SERVICE MENU. The following screen appears: Select Service 1 Voice Mail 2 Network Svc Option , then press INTERCOM/SELECT. Press twice) to select The following screen appears:...
The incoming call information is stored in the Caller ID list. If the Caller ID service includes the caller’s name, it appears on the display (up to 15 letters). Incoming Call SANYO Caller's name 905-760-9944 Caller's phone number Here are some typical displays:...
The screen shows the number of new calls and total calls. Total:02 Press to display the latest caller information. 5/17 12:30PM 03 SANYO 905-760-9944 Press to see the next caller. Or press to see previous caller. Press CID/FLASH or return the handset on the base to return to standby.
FEATURES Deleting information from the Caller ID list The Caller ID list of the CLT-2435 stores up to 50 entries. If the phone receives the 51st call, the oldest one in the list is automatically deleted. Any Caller ID entry can be deleted manually.
Page 37
All manuals and user guides at all-guides.com CLT2435 ENG-5/28 5/28/01 13:46 Page 33 CALLER ID FEATURES Deleting all Caller ID names/numbers Press CID/FLASH. Total:02 Press DELETE/SCAN. Delete All? Press to select Press INTERCOM/SELECT or DELETE/SCAN. When the pointer is at A beep tone sounds and all stored Caller ID entries are deleted.
9057609944 Notes: • When a long distance number is selected, appears in the display. • You cannot make a call from the Caller ID list if your CLT-2435 is connected to private branch exchange (PBX). Long distance numbers Press to add or remove the long distance prefix from the displayed number in step1.
Page 39
Select the phone number to be stored from the Caller ID list by pressing 5/17 12:30PM 03 SANYO 905-760-9944 Press MEMORY. Select Location 01 SANYO 02 Alison McNab Press to select the memory location. Or press the dial button ( – ) and select the number (01–20).
Many telephone companies offer an electronic mailbox service. When you subscribe to this service, your callers can leave messages for you. The CLT-2435 allows you to program your Voice Mailbox access number into its memory for quick retrieval of your messages.
ADVANCED CALLING FEATURES Voice Mail access If you subscribe to voice mail service, you can program your CLT-2435 to easily access your voice mailbox. The voice mail indicator on the base of your phone flashes and your VOICE MAIL handset displays whenever you have messages waiting in your voice mailbox.
Page 43
All manuals and user guides at all-guides.com CLT2435 ENG-5/28 5/28/01 13:47 Page 39 ADVANCED CALLING FEATURES Retrieving your voice mail messages When you have received new voice messages, the VOICE MAIL indicator on the base VOICE MAIL flashes and appears on the handset display. with the 1/ Press and hold 1/ until you hear a beep.
All manuals and user guides at all-guides.com CLT2435 ENG-5/28 5/28/01 13:47 Page 40 ADVANCED CALLING FEATURES Call transfer feature Transferring a call To transfer from the handset to the base Press INTERCOM/SELECT on the handset during Talk mode. The caller is put on hold and a series of beeps sound on the base.
All manuals and user guides at all-guides.com CLT2435 ENG-5/28 5/28/01 13:47 Page 41 ADVANCED CALLING FEATURES Intercom feature Using the intercom of your phone Paging from the base to handset Press INTERCOM/PAGE/FIND on the base. The handset beeps. (If the handset does not answer, press INTERCOM/PAGE/FIND again to disconnect.) Paging...
ADVANCED CALLING FEATURES 3-way conference feature 3-way conference The CLT-2435 allows 3-way conversation between the handset, base and an outside line. When a call is in progress on the handset Press SPEAKER on the base. This will establish the 3-way conversation mode.
All manuals and user guides at all-guides.com CLT2435 ENG-5/28 5/28/01 13:47 Page 43 ADVANCED CALLING FEATURES Accessing calling features To access the network calling features programmed into your phone, follow the instructions below. General descriptions of each service are given in the following section. For complete instructions for using each service, please contact your local telephone company.
ADVANCED CALLING FEATURES Pre-programmed calling features The following calling features and activation codes are pre-programmed in the CLT-2435. Activation codes may vary depending on local telephone company. See next page to reprogram a different code of any of these features.
Adding new features The last eight calling feature locations are available for you to program new features into your CLT-2435. You may also reprogram features in any of the other locations or restore the pre-programmed service at any time. Add or edit a service Press and hold SERVICE MENU.
Page 50
All manuals and user guides at all-guides.com CLT2435 ENG-5/28 5/28/01 13:47 Page 46 ADVANCED CALLING FEATURES Press INTERCOM/SELECT to edit the feature stored in location two. The following screen appears: Service Name Busy Redial The cursor flashes indicating that the name can be edited. Use the keys to enter a new name.
All manuals and user guides at all-guides.com CLT2435 ENG-5/28 5/28/01 13:47 Page 47 ADVANCED CALLING FEATURES Call Waiting with Options This feature gives you more options for Caller ID on Call Waiting (Visual Call Waiting). At the touch of a button, you can ask the waiting caller to hold, send the caller to your voice mail service or have a conference with both first and second callers.
All manuals and user guides at all-guides.com CLT2435 ENG-5/28 5/28/01 13:47 Page 48 ADDITIONAL INFORMATION Your CLT-2435 is pre-programmed with 8 call waiting options. Option Message Press CID/FLASH to switch callers Switch/FLASH Ask to Hold Pre-recorded message asks 2nd caller to hold...
All manuals and user guides at all-guides.com CLT2435 ENG-5/28 5/28/01 13:47 Page 49 ADDITIONAL INFORMATION Installing the belt clip To attach the belt clip To remove the belt clip Insert the belt clip into the holes on Insert a standard flat head screwdriver each side of the handset.
All manuals and user guides at all-guides.com CLT2435 ENG-5/28 5/28/01 13:47 Page 50 ADDITIONAL INFORMATION Note on power source RECYCLING NICKEL- Battery replacement and CADMIUM BATTERIES handling NICKEL-CADMIUM When the operating time becomes short, even after a battery is recharged, BATTERIES MUST please replace the battery.
All manuals and user guides at all-guides.com CLT2435 ENG-5/28 5/28/01 13:47 Page 51 TROUBLESHOOTING If your phone is not performing to your expectations, please try these simple steps first. Symptom Suggestion The CHARGE/IN USE • Make sure the AC adaptor is plugged into the base unit indicator won't come on and wall outlet.
Operation is subject to the following two conditions: (1) this This symbol on the product is used to identify the following device may not cause interference, and (2) this device must important information. Use only with specified SANYO power accept any interference, including interference that may cause adaptor.
WHAT IS NOT COVERED improvement in or on the product. (a) Communications products purchased (b). In no event shall SANYO Canada Inc. or any outside Canada. of its Authorized Dealers be liable for (b) Communications products purchased in a special or consequential damage arising used condition.
Page 58
13:47 Page 54 At Sanyo, fulfilling the needs of our customers is a priority. That’s why we created our Sanyo On Site (SOS) customer service program that guarantees satisfaction. We’re so confident about the quality of our products that we’re expanding our warranty to include the following exceptional, new level of service.
Page 59
All manuals and user guides at all-guides.com CLT2435 ENG-5/28 5/28/01 13:47 Page 55...
Page 60
All manuals and user guides at all-guides.com CLT2435 ENG-5/28 5/28/01 13:47 Page 56 Covered under one or more of the following U.S. patents: SANYO All rights reserved UCZZ01750GZ Printed in China...